Home > Gearboxes > DART Actuators >

DART, Sensor Kit (am-3077a)

Items in Photo Not Proportionate in Size
 
Price: $34.00

Stock Status: In Stock
Qty:

Info Downloads
 
Product Overview:
The Sensor Kit for the DART Linear Actuator includes two hall effect sensors (am-3313), an aluminum mounting bracket, and associated hardware. The hall effect sensors are intended to be used for end of travel sensing.

This kit is designed to be used with the 12" DART (am-3072a) or 6" DART (am-3076a) linear actuator. Both bracket lengths are included.

Be sure to position the sensors at a location so that the DART lead screw does not travel as far to bottom out the brass nut at the end of stroke.

It is recommended to run this actuator with hall effect and/or current protection as it is possible to stall or "stick" the lead screws when stalled against a hard stop at both ends of travel. It's recommended to use the the hall effect switches to limit travel of the actuator from the end stops. When using faster ratios it may be possible to overrun the limits slightly and programming methods may require ease into stroke ends. If you are not able to program these functions we recommend using a Talon SRX (am-2854) which has on-board switch monitoring and current protection.

Be sure to assemble the DART so that the magnet on the Back Bearing is located under the location that the hall effect sensor is mounted.


Sensor Specifications:
  • Size: 0.75" x 0.75" square
  • Mounting holes: 0.136 diameter (4) in each corner with a 0.50" center to center distance

Included Hardware:
  • Two - Hall Effect Sensor (am-3313)
  • One - 6" Sensor Bracket (am-3301)
  • One - 12" Sensor Bracket (am-3252)
  • Four - #4-40 x 3/8" SHCS (am-1032)
  • Four - #4-40 Nylock Nut (am-1139)

Average Customer Review: 4.5 of 5 Total Reviews: 4 Write your own review!

  0 of 0 people found the following review helpful:
 
February 23, 2017
Reviewer: Joan Foley from Ortonville, MN United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good instructions August 9, 2016
Reviewer: Anonymous Person from Ottawa, ON Canada  
Assembly was a little different from instructions, needs minor tweaking

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
February 18, 2016
Reviewer: Anonymous Person from Owatonna, MN United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
good delivery time February 4, 2016
Reviewer: Joe Balint from Lake Hopatcong, NJ United States  
Delivery time has been excellent.  But considering it's build season, it's really been incredible. Almost on par with McMaster, but with much better and more robo-centric parts!  Keep it up, Andy!

Was this review helpful to you?


Browse products in the same categories:

Gearboxes > DART Actuators
Browse ALL Products > Miscellaneous
Browse ALL Products
New Products