Home > Gearboxes >

Afterburner Winch Kit (am-3344)
Afterburner Winch Kit (am-3344)
Some hardware not shown
Alternative Views:

Price: $240.00

Stock Status:(Out of Stock)

Info Downloads
Product Overview:
Sometimes, you just need a winch! Our Afterburner Winch Kit mounts easily to the Rocketbox PTO to provide an additional 15:24 reduction and a 1.426" winch drum for your robot's needs. This winch bolts onto the the RocketBox and interfaces with the Mechanism Output Shaft of the gearbox via a sprocket and chain reduction to provide a winching solution for various mechanisms. This winch also features an integrated lock-out plate and cylinder to create a locking, non-back-driveable winch solution. This allows your robot to save weight by using your drive motors for high-load tasks like retracting a climber or cocking back a shooter in situations where you don't need to drive at the same time.

Key Features:
  • Mounts to Rocketbox
  • Provides an additional 15:24 reduction
  • Air cylinder included
  • Weight: 5.5 lbs
  • Housing Material: 6160 Aluminum
  • Dimensions: 10" x 7.75" x 4.063" with air cylinder installed
  • Winch Drum Radius: 1.426"
    • Remember when calculating, the winch drum diameter will increase as your cable or strap is taken in!
Included Hardware:
Attached Hardware:
Loose Hardware:
Motor Input:
Designed to interface with the Rocketbox PTO as a winch system. However, any 1/2" hex shaft of suitable length could drive the input sprocket.

Tell us what you think! Be the first to write a review

Browse products in the same categories:

Browse ALL Products